DESAIN STRUKTUR GEDUNG 24 LANTAI DENGAN SISTEM RANGKA PEMIKUL MOMEN KHUSUS (SRPMK) DAN SISTEM GANDA MENGGUNAKAN PERFOMANCE BASED DESIGN BERDASARKAN SNI 2847:2019

  • Andika Hadi Pranata Universitas Narotama
  • Tony Hartono Bagio Universitas Narotama
  • Julistyana Tistogondo Universitas Narotama
Keywords: Structure, Reinforced concrete, SMRFS, Dual systems

Abstract

A reinforced concrete building concrete reinforced that floored many extreme vulnerable to collapse if it is not well planned. Therefore, needed a planning structure that can qualify the criteria of strenght, serviceability, safety, and durability. The performance of a building will work and be more optimal if structural planning and analytical methods are correct. This planning is aided by a 17th version of ETABS program, the process of planning is made based on structural concrete requirements for buildings (SNI 2847-2019) and earthquake resistance planning ordinances (SNI 1726-2019). The purpose of this building structure planning is to produce calculations based on SNI. This design produces a main beam with type 35/70 with 2D22 top & bottom 2D22 reinforcement and D10-125 & D10-300 stirrup reinforcement, the second type 50/100 with 4D22 top & bottom 2D22 reinforcement and D10-125 & D10-300 stirrup reinforcement. Sec-beam type 25/50 with 2D16 bottom & 2D16 top reinforcement and D10-125 & D10-225 stirrup reinforcement. One way plate 14cm thick with D10-200 reinforcement. Column type 145x145 with 28D22 reinforcement & D10-125 stirrups, 135x135 type with 24D32 reinforcement & D10-125 stirrups, 110x110 type with 16D32 reinforcement & D10-125 stirrups, 100x100 type with 12D32 reinforcement & D10-125 stirrups. and 1 type of shearwall with a wall thickness of 40cm with 2D13-100 boundary reinforcement & 2x5D16-150 Ties.

References

Bagio, Tony Hartono., (2019), Dasar-dasar Beton Bertulang, Yogyakarta : ANDI
Budiono, Bambang., (2012), Contoh Desain Bangunan Tahan Gempa dengan Sistem Rangka Pemikul Momen Khusus dan Sistem Dinding Struktur Khusus di Jakarta. Bandung : ITB
Hatmoko, Bima Nur Rengga., (2014), Studi Alternatif Perencanaan Gedung Bertingkat Tinggi Dengan X-Bracing Sebagai Penahan Gaya Lateral Gempa Pada Perencanaan Gedung Ijen Padjadjaran Suites Hotel Residence – Malang, Skripsi, Institut Teknologi Nasional, Malang
Kusuma, Rafael Dani., (2017), Modifikasi Struktur Gedung Dental Nano dengan Metode SRPMK dan Shearwall (dual System) pada wilayah gempa tinggi dan Metode Konstruksi kolom, Skripsi, Institut Teknologi Sepuluh November
Masbasuki., (2018), Desain Apartment 38 Lantai dengan Sistem Rangka Pemikul Momen Menengah (SRPMM) Studi Kasus : Apartment 88 Avenue. Surabaya, Skripsi, Universitas Naromata Surabaya
Prihandini, Inneke Ayu., (2017), Perencanaan Struktur Gedung Beton Bertulang Bengkel dan Laboratorium Politeknik Perkapalan Negeri Surabaya dengan Metode Sistem Rangka Pemikul Momen Khusus (SRPMK), Skripsi, Institut Teknologi Sepuluh November, Surabaya
Qadhafi, Ahmad Yaseer., (2018), Desain Apartmen 34 lantai (Tipe SOHO) dengan Konstruksi Beton (Studi Kasus : Apartmen 88 Avenue Surabaya), Skripsi, Universitas Narotama, Surabaya
SNI, 1727-2013., (2013), Beban Minimum Untuk Perencangan Bangunan Gedung dan Struktur Lain
SNI, 1726-2019., (2019), Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung dan Non Gedung
SNI 2847-2019., (2019), Persyaratan Beton Struktural untuk Bangunan Gedung
Usman & Tavio., (2018), Desain Rekayasa Gempa Berbasis Kinerja (Perfomance Based Design) Edisi 2, Yogyakarta : ANDI
Published
2021-10-21
Abstract viewed = 0 times
PDF (Bahasa Indonesia) downloaded = 0 times