ANALISIS BIAYA DAN WAKTU PERCEPATAN PEKERJAAN PROYEK KONSTRUKSI DENGAN MENGGUNAKAN PELAT BONDEK
Abstract
Bondek slab is a composite slab consisting of galvanized steel, wiremesh and concrete. Compared to conventional slab, bondek slab themselve are still not applied to often in Indonesia because it requires special calculations to use them. The purpose of the study are to calculate the budget and period of slab work by using the bondek slab method and determine the budget and period efficiency of using the conventional slab and bondek slab. To find this out, analysis is carried out starting from structur analysis, volume analysis, budget analysis and period analysis. The analysis shows that the slab can reduce the cost of slab implementation is 35.45% or Rp. 1,223,932,278.33 and accelerate the time for floor slab work is 36.21% or 63 days, which originally used conventional floor slab cost is Rp. 3,452,222,761.32 and the duration of work is 174 days. While if use a bondek slab only costs is Rp. 2,228,290,482.99 and the duration of work is 111 days.References
Badan Standardiasi Nasional.2013.Tata Cara Perhitungan Struktur Beton Untuk Bangunan Gedung SNI 2847:2013. Jakarta:BSN
Badan Standardiasi Nasional.2013.Beban Minimum Untuk Perancangan Bangunan Gedung dan Struktur Lain SNI 1727:2013. Jakarta:BSN
Departemen Permukiman dan Prasarana Wilayah. 2002. “Peraturan Pembebanan Indonesia Untuk Gedung (PPIUG) 1983”. Jakarta.
Fastaria R dan Yusroniya. 2014. Analisa Perbandingan Metode Halfslab dan Pelat Komposit Bondek Pekerjaan Struktur Plat Lantai Proyek Pembangunan Apartement De Papilio Tamansari Surabaya. Jurnal Teknik PomITS.
PT. UNION METAL: Spesifikasi dan desain pelat bondek (http://elib.unikom. ac.id/download.php?id=19690, 03-08/2015).
Faculty of Engineering accepts scientific writings in the form of research, conceptual results, and studies of new books in the fields of structure, transportation, water, project management, and environmental engineering. The written articles are the original work of the author, not reflecting the opinion of the Faculty of Engineering. The author is responsible for his writings published in this journal. The Faculty of Engineering has the right to accept, reject, or make corrections without changing the intent and purpose of writing.