OPTIMIZATION OF MIX DESIGN K 350 IN PRECAST CONCRETE

  • Kuncoro Kuncoro Universitas Narotama
Keywords: Cement Content, Mix Design, Box Culvert, efficient

Abstract

Currently the price of cement is getting more expensive. Competition among precast concrete producers is increasing, especially the production of box culvert. The desire of most markets is the culvert box that meets the strength / strength standard with the emphasis on production costs. Mix Design Engineering aims to reduce the cement content and maintain the strength of Concrete and lower production costs. This research was conducted by engineering or optimizing the use of content cement and rock ash substitution against Lumajang Sand   K-350 concrete mix. The most efficient results were using cement as much as 325 kg, natural sand 530 kg, dust stone 230 kg, crushed stone 1-2 795 kg, crushed stone 5-10 340 kg, water 83,51 liter, additive Consol N15 4,6 liter. Efficiency obtained from the mix design is IDR 47.692, - / m3.

References

Choliq Dan Indryani, (2015). Penerapan Rekayasa Nilai Pada Proyek Pembangunan Hotel Ciputra World di Surabaya. Institut Teknologi Sepuluh November. Surabaya.
Dell’Isola, (1975). Value Engineering in The Construction Industry. Nostrand Reinhold Company. New York.
Koespiadi. 2018. “The Influence of Scoring System Electronic Procurement on The Development of Construction Service in Indonesia”. ADRI International Journal of Civil Engineering 1 (1), 30-32 | vol: |
Manggala Dan Utomo, (2014). Penerapan Rekayasa Nilai Pada Proyek Pembangunan Rumah Tipe 39 di Perumahan Sapphire Park Regency Surabay.Institut Teknologi Sepuluh November. Surabaya.
Sabrang, H., (1998). Value Engineering. Universitas Atmajaya. Yogyakarta.
Sindur, (2011). Struktur Baja. Bandung : Institut Teknologi. Bandung.
Soeharto, I., (2001). Manajemen Proyek. Jilid 2 edisi kedua.Erlangga. Jakarta.
Published
2019-10-24